S5 Corpway - шаблон joomla Joomla
Ultrasonic Flowmeter

Ultrasonic Flowmeter

  • Ultrasonic Water Meter

  • TDS-100P Portable

  • TDS-100Y Remote

GN logo
GN int standards

GN Ultrasonic Water Meter

Low power ultrasonic water meter is designed according to Europe alliance EN1434 standard and ultrasonic time-difference principle. It can instead of other water meter and Install in any angle. Ultrasonic time-difference principle Measuring water or other liquid.

 

Applications: 

Ultrasonic Water Meter
  • Clean water, sewage water / wastewater.
  • Food & Beverage industry.
  • Chemical and pharmaceutical industry.
  • Power plant, hydro power plant and mining.
  • Agricultural irrigation.
  • Pulp & paper industry.
  • Mining and many more.

 

Features:
  • No moving parts, no abrasion.
  • No nursing for 10 years.
  • Battery can work 6 - 10 years, or two line power.
  • No flow enhance equipment.
  • Suits for various type of liquid.
  • Lowest measuring velocity of liquid 0.01 m/s.
  • Pipe length design according to the normal water meter.
  • Not affected by temperature, viscosity, pressure and density.
  • Anti-corrosion.
  • Measure both forward and reverse flow.
  • IP68 can work under water up to 2 meters depth.
  • Foundry in mould, no reveal.
  • Large display, easy to operate.
  • Wide working voltage range.

 

 Technical Specifications

Compliant to International Standard

Europe Alliance EN1434

Models Integrated type and Remote type
Accuracy 1%, 2%
Repeatability 0.5%
Measuring period 3 s, 1-31s (selection)
Measuring medium liquid or solid-liquid two phase fluid, conductivity >5 µs/cm2
Body material Carbon steel, SS-304
Enclosure IP68
Diameter 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250
Connection DN15 - DN1000 flange connection (ANSI, DIN, JIS)
Electrode material Ceramic
Lining material Natural Rubber (soft rubber), Acid Resistant Rubber (hard rubber), Neoprene, FEP, PU, PTFE
Pressure 4.0 Mpa
Display LCD, current clock to indicate flow data, flow rate, totalizer, alarm
Keypad 4 buttons keypad for easy setting and display control
Display Unit m3/h, m3/min, m3/s or L/h, L/min, L/s or mass flow kg/h, kg/min, kg/s, T/h, T/min, T/s. Totalizer unit: m3 or L
Alarm system Coil Alarm, Electrode Alarm, Empty Pipe Alarm, High & Low Level Alarm
Output signal 4-20 mA or pulse output
Communication RS485 (optional)
Power supply AC86-220V or DC24V (optional), Battery (optional)
Ambient temperature -40 ~ 160 °C
Ambient humidity < 85% µ.h (non-condensation)
GN logo
GN int standards

GN Portable Ultrasonic Water Meter (TDS-100P)

TDS-100P is widely used to measure liquid flow in various industries. Thanks to it's advantages such as high accuracy, good repeatability, long-running cell, easy operation,built-in printer etc. The flowmeter is very popular in industries like petrochemical, water, power, energy monitoring etc.

 

Applications: 

TDS 100P control small
  • Clean water, sewage water / wastewater.
  • Food & Beverage industry.
  • Chemical and pharmaceutical industry.
  • Petrochemical.
  • Energy monitoring.
  • Power plant, hydro power plant and mining.
  • Agricultural irrigation.
  • Pulp & paper industry.
  • Mining and many more.
 
Features:
  • Accuracy: ±1%.
  • Repeatability: ±0.2%.
  • Easy to install outside the pipe.
  • 2 line display: Instantaneous flow rate,Accumulate flow, status.
  • Built-in printer, to print in time or regularly.
  • Standard interface RS232 for data output and on-line operation.
  • Self-diagnose to show the current status.
  • Built-in Nickel-hydrogen cell supports 20 hours of operation.

 

Standard Configuration

TDS 100P controlTDS100P Cable + TDS100P S1 + TDS 100P box

 

Technical Specifications

SENSOR S1 M1 L1 S1 M1H
PICTURE TDS100P S1 TDS100P M1 TDS100P L1 TDS100P S1H TDS100P M1H
PIPE SIZE DN15 - DN100 DN50 - DN700 DN300 - DN6000 DN15-DN100 DN50 - DN700
MATERIAL ABS Special material for H-Temp
FREQUENCY 1 MHz
INSTALLATION V (N, W) V, Z Z V (N, W) V, Z
CALIBRATION Calibrated together with flowmeter
MAGNETIC Yes No
TEMPERATURE 0 ~ 70 °C 0 ~ 160 °C
IP IP65
OUTLINE SIZE 45x30x30 60x45x45 80x70x55 90x85x24 90x82x29
N.W. (g/2pcs) 75 250 650 94 150
MEDIUM Water, sea water, sewage, alcohol, oil, etc   
TURBIDITY ≤10,000ppm with little air bubble
PIPE Carbon steel, stainless steel, cast iron, brass, PVC, aluminium, etc.
PIPE LINER Rubber, slurry, PP, PS, bakelite, PTFE
SIGNAL CABLE Standard: 5m x 2, Optional 10m x 2 or 15m x 2
GN logo
GN int standards

GN Ultrasonic Flowmeter with Remote Display (TDS-100Y)

Ultrasonic flowmeter TDS-100Y can be widely used to measure liquid on various applications of industry.TDS 100Y Ultrasonic Flowmeter with Remote Display

 

Applications: 

  • Clean water, sewage water / wastewater.
  • Food & Beverage industry.
  • Chemical and pharmaceutical industry.
  • Petrochemical.
  • Energy monitoring.
  • Power plant, hydro power plant and mining.
  • Agricultural irrigation.
  • Pulp & paper industry.
  • Mining and many more.
 
Features:
  • Accuracy: ±1%.
  • Repeatability: ±0.2%.
  • Measurement cycle: 500ms (2 times/s).
  • Power supply: AC220V / DC24 (optional).
  • Display: 2 x 10 LCD, +/-/net instantaneous flow rate, accumulative flow, temperature and status.
  • Operation: 4 x 4 keys.
  • Signal output: current signal: 4-20 mA, frequency signal: 1-9999Hz (OCT output), pulse signal: pulse of +/-/net flow accumulation. Relay output.
  • Alarm signal: Relay and OCT output.
  • Signal output: 1 way or 3 way 4-20mA input, precision 0.1%.
  • Data interface: RS232/RS485
  • Communication Protocol: MODBUS.
  • Other function: internal memory to store accumulative flow for 64 days / 64 months /5 years.
  • Internal memory to store time and flow of last 64 times of power on and off. Manual compensation is possible if necessary.

 

Technical Specifications

SENSOR S1 M1 L1 S1 M1H
PICTURE TDS100P S1 TDS100P M1 TDS100P L1 TDS100P S1H TDS100P M1H
PIPE SIZE DN15 - DN100 DN50 - DN700 DN300 - DN6000 DN15-DN100 DN50 - DN700
MATERIAL ABS Special material for H-Temp
FREQUENCY 1 MHz
INSTALLATION V (N, W) V, Z Z V (N, W) V, Z
CALIBRATION Calibrated together with flowmeter
MAGNETIC Yes No
TEMPERATURE 0 ~ 70 °C 0 ~ 160 °C
IP IP65
OUTLINE SIZE 45x30x30 60x45x45 80x70x55 90x85x24 90x82x29
N.W. (g/2pcs) 75 250 650 94 150
MEDIUM Water, sea water, sewage, alcohol, oil, etc   
TURBIDITY ≤10,000ppm with little air bubble
PIPE Carbon steel, stainless steel, cast iron, brass, PVC, aluminium, etc.
PIPE LINER Rubber, slurry, PP, PS, bakelite, PTFE
SIGNAL CABLE Standard: 5m x 2, Optional 10m x 2 or 15m x 2

Call Us Now

Phone : +62 (21) 5858581

Fax     : +62 (21) 5858570

Inquiry: This email address is being protected from spambots. You need JavaScript enabled to view it.